Largest And Most Powerfull Model Of Avant
- Largest lifting capacity and pulling force and speed even 30 km/h
- All attachments work properly
- Telescopic boom as a standard
- A large and varied selection of options
- All cabin variants, including air conditioning available
- Excellent visibility
- Safety canopy and safety roof as a standard
- Load sensor
- Telescopic boom and lifting power
- Fast and easy to connect attachments
- Easy to drive
- Speeds up to 30 km/h
- Same machine can perform all the tasks
- Low operating costs
- Low maintenance
- Compact and strong construction
- Over 100 attachments
- Year-round solution
- Compact machine
- Gentle on the lawn
Large and Powerful
- Lifting capacity
- Speed and pulling force
|Standard wheels||320/55-15” TR/grass|
|Aux. hydraulics oil flow / pressure||70 l/min 240 bar|
|Turning radius inside/outside||1240 / 2780 mm|
|Max. lifting height||3080 mm|
|Max. lifting capacity (hydr.)||2100 kg|
|Tipping load *||1400 kg|
|Max. breakout force / 50 cm||1700 kg|
|Engine make and type||Kubota V2403|
|Engine output (ISO Gross)||36 kW (49 hp)|
*) Load is measured at 400 mm from the attachment coupling plate, including attachment weight (70 kg) and with counterweights.
|Drive motors / Wheel size||Drive speed||Pulling force|
|320/60-12 HD||22 km/h||1880 kp|
|320/55-15 HD||25 km/h||1600 kp|
|27 x 8.50 – 15||1080 mm|
|26 x 12.00 – 12||1350 mm|
|320/60-12 HD||1350 mm|
|320/55-15 HD||1360 mm|
HEIGHT WITH CAB
|.||745/750 with 26×12.00-12 or 320/60-12||Avant 700 with 320/55-15|
|LX Cab||2078 mm||2112 mm|
|DLX Cab||2105 mm||2139 mm|
|DLX with A/C on the roof||2241 mm||2275 mm|
LARGEST AND MOST POWERFUL
Product development with Avant 700-series has been strongly focused in to lifting capacity. Larger outside dimensions naturally give better balance to the lifting weight. The lifting capacity with the 700-series is even 1600 kg and the maximal breakout force is even 35% better than in the 600-series. This is how the larger dimensions are fully utilized.
The new AVANT 760i model is equipped with the most modern driving technique allowing the loader to speed up to 30 km/h. With AVANT 760i it is able to achieve 20 % more engine output, 40 % more torque and 20 % lower fuel consumption than on Avant 750.
The speed of the model AVANT 750 is even 25km/h. This speed enables to use 750 loader effectively also in property maintenance in the cities. The speed of AVANT 745 is 14 km/h, which is enough while working in smaller areas or construction site.
Avant 700 series wheelbase is 30 inches longer compared to the 600 – and 500-series. Also slightly larger wheel size calms driving and increases comfort, especially at higher speeds.Other options, accessories and different cabin levels increase comfort as well.
OVER 100 ATTACHMENTS
AVANT attachments have been designed to work as an equal partner on AVANT loaders, following these principles:
Best machine-attachment combination can only be achieved when a good basic machine is fitted with attachments that are specifically designed for this machine. The dimensions, auxiliary hydraulics output and other features of AVANT are in perfect balance with the attachments.
Work efficiency of the attachments is of great importance. AVANT attachments have been designed to give maximum output with the combination loader-attachment.
Attachments are designed for hard, continuous professional work.
Special attention has been paid to safety features in attachment design.
Avant-loaders and attachments have been designed for year-round use. Cab options, work light options and technical solutions in the loaders have been made as well to the winter cold as to the summer afternoon. Avants features are therefore very versatile for year-round use. Wide range of attachments will ensure that the machine is not standing without use a large part of the year but that there will be lots of beneficial uses each time of the year.
Compact loader does not always mean low in power. Compared to other same sized articulated loaders, Avant has significantly smaller outer dimensions. This enables excellent visibility from the machine and working in tight spaces. In the rear of this compact loader You really feel that you are on control of the attachment and your working conditions.
GENTLE ON THE LAWN
Light machine combined with articulation enables driving on sensitive ground without harming it. This saves a lot of time because You wont have to repair damages after Your work is done. It also enables use of the loader as an effective lawn mover.
In the development of all Avant machines the focus has been on excellent visibility. Driver has to see the whole machine; from the front, back and both sides. Same goes to machines equipped with safety canopy as with cabin.
Cabin which is build to the front frame of the machine has an very important role with visibility. It provides the best sight to the attachment and work.The best touch to the work is achieved when the driver is sitting as near to the attachment as possible.
Third important fact with visibility is Avants eccentric telescopic boom. Telescopic boom is located aside from the centralline of the machine and due to this the visibility to the front is very good in every position of the boom.
All Avant loaders have rigid articulation joint. This is the single most important factor in helping to achieve the excellent stability in all situations. In addition of articulation joint, center of gravity has been put as low as possible so that the stability of the loader increases.
There is a ROPS-accepted safety canopy and FOPS-accepted safety roof as a standard equipment in every 700-series loader.
A load sensor is fitted as standard to the AVANT 700 series and provides an audible warning if the rear wheels are about to lift off the ground. This pre emptive warning gives the operator more time to react in the event of the machine becoming unstable.
SAME LOADER PERFORMS ALL THE TASKS
With over 100 attachment Avant is a loader which is very easy and flexible to change into all kinds of works. Changing attachment is very fast and simple. So, with the same loader You can perform all kinds of work just by changing the attachment.
LOW OPERATING COSTS
Compact and articulated loader consumes remarkably little fuel and in normal use it is possible to get under 3 l/h consumption with 700-series loaders. Due to the articulated structure also the consumption of the tires is minimalistic.
Simple and transparent construction and high quality components reduce significantly the need of maintanance. Low amount of electronics and the use of well-known components reduce the price of maintenance.
COMPACT AND STRONG CONSTRUCTION
Avant loaders have been tested in the colds of Antarktis as well as in the burning heats of Middle East. Strong experience and test in all kinds of working conditions ensure that the loader will last unbreakable in different kinds of heavy duty working conditions and construction areas.
Avant has been known from its telescopic boom for a long time. It makes it possible that the structure of the loader is very compact and that the lifting capacity is great. When the telescopic boom is inside it is possible to lift huge weights while as the boom is outside it is possible to reach excellent dimension and lifting height. Very often wide dimension is even more important than the lifting height.
CONNECTING THE ATTACHMENTS
Avant attachment connection system enables simple and easy way of connecting the attachment. Mechanical connection system is half automatical. It means that attachment can be connected and locked directly from the cab by turning the attachment enough back.
For connecting the attachment there is hydraulic quick attachment plate also available. This quick attachment plate is fully used from the cabin of the loader and with it it is possible to release and open the connection without stepping away from the cabin. Hydraulic multi connector system of Avant is the most advanced in the market. Easy connecting and detaching also possible with engine running and/or pressure on attachment. Connection works in all situations and it cannot be connected in a wrong way. The mechanism is also leak free so changing the attacment is no longer a messy thing to do and there is no oil dropping while detaching.
EASY TO DRIVE
Articulated loaders of Avant are very easy to learn to drive. The loader is controlled from the steering wheel and driving forward and backwards happens with two pedals. The machine's compact dimensions facilitate driving, because driver can see the whole machine and attachment while sitting on the driver´s seat. Even if You don´t have any previous experience with driving machines, You can lear to drive Avant with just few hours of practise.
New Avant 760i is the fastest model of Avant loaders. Avant 760i speeds up to 30 km/h. This speed allows the new 760i to compete with bigger machines for example in property maintenance and in variable other segments.
The speed of the model AVANT 750 is even 25km/h. This speed enables to use 750 loader effectively also in property maintenance in the cities.
The speed of AVANT 745 is 14 km/h, which is enough while working in smaller areas or construction site.
Avant loaders are equipped with a certified ROPS/ FOPS safety frame with tinted plexiglass canopy as standard. In addition, there are as many as three different cab options available.
AVANT cab L is an excellent and economical choice when the operator wants to have protection against rain, wind and snowfall. It improves operator comfort and working conditions considerably. The cab mounts on the standard ROPS frame, which means safety is guaranteed. It consists of windscreen (equipped with wiper), right side window and rear window.
AVANT cab LX provides the option of a heated cab. The cab LX has all the features of cab L and, in addition, is equipped with a door and a heater, which further improve operator comfort in harsh weather conditions. And for warmer seasons the door and windows can easily be removed if required. The optional headlight, blinker, reflector + beacon kit can be installed both on cab L and LX.
The starting point of the design of the new DLX cab was to further improve the ergonomics and driver’s working conditions. The DLX cab is designed to provide best possible working conditions also in the roughest environments, from hot to cold temperatures, and from rain to sunshine. Improvements include more space inside the cab, larger windows and reduced noise levels. The much wanted option of air conditioning and air suspension seat are also now available for the new cab.
Avant 750 Compatible Attachments
Avant 750 Compatible Accessories
We would be glad to have feedback from you. Whether it is a comment, question, work proposition or just a hello, drop us a line.
Find UsReach It! - Move It! - Crush It! ~ Sales & Hire
2 Mattesdon Cottages
Lye Green, Chesham